1. Support USB to RS485 bidirectional conversion
2. Fast communication, stable and reliable, better compatibility
3. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
4. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance
5. 3 LEDs for indicating the power and transceiver status
Parameters:
1. Host Interface: USB
2. Device Interface: RS485
3. Temperature Range: -15°C to 70°C
4. Humidity Range: 5% RH to 95% RH
5. Communication Rate: 300 bps to 3 Mbps
USB Interface:
1. Operating Voltage: 5V
2. Connector Type: USB-A
3. Protection: 200mA self-recovery fuse, ESD protection
4. Transmission Distance: About 5m
RS485 Interface:
1. Connector Type: Screw terminal
2. Direction Control: Hardware automatic control
3. Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor)
4. Transmission Distance: About 1.2km(low rate)
5. Transmission Mode: Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
6. Interface Pins: A+, B-, GND
Indicator Lights:
1. PWR: Red power indicator, light up when there is USB connection and voltage is detected
2. TXD: Red TX indicator, light up when the USB port sends data
3. RXD: Red RX indicator, light up when the device ports send data back
2. Fast communication, stable and reliable, better compatibility
3. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
4. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance
5. 3 LEDs for indicating the power and transceiver status
Parameters:
1. Host Interface: USB
2. Device Interface: RS485
3. Temperature Range: -15°C to 70°C
4. Humidity Range: 5% RH to 95% RH
5. Communication Rate: 300 bps to 3 Mbps
USB Interface:
1. Operating Voltage: 5V
2. Connector Type: USB-A
3. Protection: 200mA self-recovery fuse, ESD protection
4. Transmission Distance: About 5m
RS485 Interface:
1. Connector Type: Screw terminal
2. Direction Control: Hardware automatic control
3. Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor)
4. Transmission Distance: About 1.2km(low rate)
5. Transmission Mode: Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
6. Interface Pins: A+, B-, GND
Indicator Lights:
1. PWR: Red power indicator, light up when there is USB connection and voltage is detected
2. TXD: Red TX indicator, light up when the USB port sends data
3. RXD: Red RX indicator, light up when the device ports send data back






