1. Adopts original CH344L chip, fast communicating, stable and reliable, better compatibility.
2. Supports USB to 4-ch isolated RS485, convenient for expanding multiple RS485 industrial serial devices.
3. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal.
4. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption.
5. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection.
6. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance.
7. Onboard RS485 output terminal 120R resistors, enabled/disabled via DIP switch.
8. 10 LEDs for indicating the power, device configuration status and transceiver status.
9. Industrial grade metal case, supports wall-mount & rail-mount installation, solid and beautiful, easy to install.
Parameters:
1. Host Interface: USB
2. Device Interface: RS485
3. Temperature Range: -40 ~ 85°C
4. Humidity Range: 5% RH ~ 95% RH
5. Communication Baud Rate: 1200 bps ~ 460,800 bps
USB Interface:
1. Operating Voltage: 5V
2. Connector Type: USB-B
3. Interface Protection: 500mA resettable fuse, output isolation
RS485 Interface:
1. Connector Type: Screw terminal
2. Direction Control: Hardware automatic control
3. Interface Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R matching resistors)
4. Transmission Mode: Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
Indicator LEDs:
1. PWR: Power indicator, lights up while the USB is connected and voltage is detected
2. ACT: Status indicator, lights up green while the driver is detected.
3. TXD: TXD indicator, lights up when the USB port is sending data
4. RXD: RXD indicator, lights up when the device ports send data back
2. Supports USB to 4-ch isolated RS485, convenient for expanding multiple RS485 industrial serial devices.
3. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal.
4. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption.
5. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection.
6. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance.
7. Onboard RS485 output terminal 120R resistors, enabled/disabled via DIP switch.
8. 10 LEDs for indicating the power, device configuration status and transceiver status.
9. Industrial grade metal case, supports wall-mount & rail-mount installation, solid and beautiful, easy to install.
Parameters:
1. Host Interface: USB
2. Device Interface: RS485
3. Temperature Range: -40 ~ 85°C
4. Humidity Range: 5% RH ~ 95% RH
5. Communication Baud Rate: 1200 bps ~ 460,800 bps
USB Interface:
1. Operating Voltage: 5V
2. Connector Type: USB-B
3. Interface Protection: 500mA resettable fuse, output isolation
RS485 Interface:
1. Connector Type: Screw terminal
2. Direction Control: Hardware automatic control
3. Interface Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R matching resistors)
4. Transmission Mode: Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
Indicator LEDs:
1. PWR: Power indicator, lights up while the USB is connected and voltage is detected
2. ACT: Status indicator, lights up green while the driver is detected.
3. TXD: TXD indicator, lights up when the USB port is sending data
4. RXD: RXD indicator, lights up when the device ports send data back










